If you’re looking for ways to improve your home’s appearance without breaking the bank, then look no further than uPVC window spraying. This relatively new technique has taken the renovation industry by storm and offers several benefits that can significantly enhance your property’s curb appeal. In this article, we will explain what uPVC window spraying is, its advantages over traditional repainting methods, step-by-step instructions on how it works, and tips on choosing the right color scheme for maximum impact. So let’s get started!
What is UPVC Window Spraying?
UPVC (Unplasticized Polyvinyl Chloride) windows are becoming increasingly popular in modern homes due to their durability, low maintenance requirements, and energy efficiency. However, after years of exposure to weather elements, UV rays, and pollution, these white frames may start looking dull, faded or discolored. Fortunately, there’s an easy fix: UPVC window spraying. This innovative process involves applying a special coating onto existing UPVC window frames instead of replacing them altogether. The result is a brand new, vibrant finish that looks as good as new for up to ten years with minimal effort required from the homeowner.
Advantages of UPVC Window Spraying Over Traditional Repainting Methods
There are numerous reasons why UPVC window spraying is preferred over conventional repainting techniques:
- Cost-effective – Compared to replacing old windows entirely, which could be quite expensive, spraying your current frames saves money and time. It also eliminates the need for removing furniture, carpets, and curtains during the installation phase since there’s no actual replacement involved.
- Faster turnaround time – Since there’s less prep work involved in spraying compared to painting, the whole process takes only two days per house, depending on the size of the project. Moreover, once dry, you don’t have to wait long before resuming normal activities around the house.
- Lower environmental footprint – Applying a fresh coat via spray guns consumes fewer materials like paint, solvents, and brushes than traditional methods. As such, it creates lesser waste and pollutants that harm our planet.
- Better coverage & quality – By utilizing high-grade equipment and premium paints specially formulated for UPVC surfaces, every nook and cranny gets covered thoroughly without missing spots, unlike hand-brushing where human error is more probable. Plus, the end product yields smoother and flatter results with superior adhesion and durability.
How Does UPVC Window Spraying Work?
The following steps illustrate the basic procedure used by experienced technicians when carrying out uPVC window spraying services:
Step 1: Preparation & Cleaning
Before starting the job, the contractor inspects each frame closely, checking for any damages or defects that might hinder the success rate of the operation. They remove dirt, grime, and dust using specialized cleaning solutions and tools. If necessary, they sand down rough patches and fill holes and gaps with suitable putty. Afterward, all surfaces undergo thorough drying to ensure optimal absorption rates later on.
Step 2: Masking off Adjoining Areas
To prevent accidental splatters and overspraying, masking tape, drop sheets, and plastic sheeting cover adjacent areas such as walls, doors, plants, cars, etc., creating clean lines between the window frames and other surroundings.
Step 3: Priming the Surface
A primer acts as a base layer that helps the final color stick better and longer while also enhancing the texture and smoothness of the material. A few minutes after application, the surface becomes ready for the next stage.
Step 4: Spray Painting Process
With protective gear such as respiratory masks, gloves, and goggles, trained personnel apply the chosen shade evenly over the primed area using compressed air guns fitted with adjustable spray tips. They use overlapping strokes, maintaining consistent pressure to avoid drips and runs. Any unwanted marks are immediately rectified via touch-ups. Once done, they wipe away excess droplets left behind.
Step 5: Final Inspection & Debriefing
After completing the last section, the specialists do a comprehensive evaluation of the entire set, double-checking if everything looks satisfactory from different angles and perspectives. Then, they inform the client about the successful completion and offer recommendations regarding future care routines.
Tips for Choosing Colors That Boost Curb Appeal
Choosing colors for your UPVC windows isn’t just about personal preference; it should align with the overall aesthetics of your property. Below are some ideas that can add value and visual interest:
• Complementary shades – Opt for contrasting tones that stand out against the background yet harmonize well together, such as black/white, red/cream, green/gray, blue/yellow, etc.
• Neutral palette – For those who prefer a subdued look, neutrals like white, gray, beige, brown, navy, or cream provide timeless elegance and versatility.
• Coordination with door colors – To create consistency and balance throughout the exterior facade, consider coordinating the window frames with front door hues or complementary colors.
Conclusion
In summary, UPVC window spraying offers several benefits, including being cost-effective, faster turnaround times, lower environmental impact, and better coverage and quality due to the use of specialized equipment and high-quality paints. When choosing colors for your UPVC windows, remember to consider complementary shades or neutral palettes that align with the overall aesthetic of your property, as well as coordinating with door colors for consistency and balance. We strongly recommend hiring licensed professionals for this task to ensure safe handling of chemicals, proper safety measures, and expert craftsmanship.